AutoDrill
50 Division Avenue
Millington, NJ 07946
Ph. 800-871-5022
Fax: 908-542-0242
Spindle Drives
|
Engineering Files for Download
All DWG files are uncompressed and can be used "as-is". The DXF files are self-extracting. They must be "RUN" to automatically extract. This can be done by "Double Clicking" the file name in Windows Explorer. They are saved in a subdirectory, C:\AutoDrill, by default or in the directory specified when they are extracted.
Most Series 2000-2100 applications will require an AutoDrill file and a Chucks or Tapping Heads file. All the available Chucks are in one file for brevity and convenience. The Tapping Heads are also grouped in one file. Notice that an "X" is visible in the AutoDrill drawings at the spindle end where a Chuck or Tapping Head should be placed. The Chucks and Tapping Heads have a corresponding "X" for snap purposes. The Chuck may have a phantom line corresponding to where the tooling approximately bottoms.
The left column is the DWG R14 format for AutoCad R14/2000, AuotCad LT 97/98/2000 and recent Windows CAD programs. The right column is the DXF R12/R14 format for older versions of AutoCad and CAD programs. Close "Center to Center" spacing usually require individual layouts and are not listed. Please call our Engineering Department for close "Center to Center" spacing or any special needs.
AutoDrill Series 2000-2100 Drawings, Less Drive (-X, X=Hydro Speed Stroke) |
| |
DWG R14 |
|
DXF R12/R14 |
| |
2020 AutoDrill |
|
2020 AutoDrill |
| |
2040 AutoDrill |
|
2040 AutoDrill |
| |
2120-1 AutoDrill |
|
2120-1 AutoDrill |
| |
2120-2 AutoDrill |
|
2120-2 AutoDrill |
| |
2140-1 AutoDrill |
|
2140-1 AutoDrill |
| |
2140-2 AutoDrill |
|
2140-2 AutoDrill |
| |
2140-3 AutoDrill |
|
2140-3 AutoDrill |
| |
2090 AutoDrill |
|
2090 AutoDrill |
| |
2190-1 AutoDrill |
|
2190-1 AutoDrill |
| |
2190-2 AutoDrill |
|
2190-2 AutoDrill |
| |
2190-3 AutoDrill |
|
2190-3 AutoDrill |
| |
2190-4 AutoDrill |
|
2190-4 AutoDrill |
| |
2190-5 AutoDrill |
|
2190-5 AutoDrill |
| |
AutoDrill Series 2000-2100, Rear Mounted Drive, "UR" Arrangement (-X, X=Hydro Speed Stroke) |
| |
DWG R14 |
|
DXF R12/R14 |
| |
2020 AutoDrill |
|
2020 AutoDrill |
| |
2040 AutoDrill |
|
2040 AutoDrill |
| |
2120-1 AutoDrill |
|
2120-1 AutoDrill |
| |
2120-2 AutoDrill |
|
2120-2 AutoDrill |
| |
2140-1 AutoDrill |
|
2140-1 AutoDrill |
| |
2140-2 AutoDrill |
|
2140-2 AutoDrill |
| |
2140-3 AutoDrill |
|
2140-3 AutoDrill |
| |
2090 AutoDrill |
|
2090 AutoDrill |
| |
2190-1 AutoDrill |
|
2190-1 AutoDrill |
| |
2190-2 AutoDrill |
|
2190-2 AutoDrill |
| |
2190-3 AutoDrill |
|
2190-3 AutoDrill |
| |
2190-4 AutoDrill |
|
2190-4 AutoDrill |
| |
2190-5 AutoDrill |
|
2190-5 AutoDrill |
| |
AutoDrill Series 2000-2100, Top Mounted Drive, "UT" Arrangement (-X, X=Hydro Speed Stroke) |
| |
DWG R14 |
|
DXF R12/R14 |
| |
2020 AutoDrill |
|
2020 AutoDrill |
| |
2040 AutoDrill |
|
2040 AutoDrill |
| |
2120-1 AutoDrill |
|
2120-1 AutoDrill |
| |
2120-2 AutoDrill |
|
2120-2 AutoDrill |
| |
2140-1 AutoDrill |
|
2140-1 AutoDrill |
| |
2140-2 AutoDrill |
|
2140-2 AutoDrill |
| |
2140-3 AutoDrill |
|
2140-3 AutoDrill |
| |
2090 AutoDrill |
|
2090 AutoDrill |
| |
2190-1 AutoDrill |
|
2190-1 AutoDrill |
| |
2190-2 AutoDrill |
|
2190-2 AutoDrill |
| |
2190-3 AutoDrill |
|
2190-3 AutoDrill |
| |
2190-4 AutoDrill |
|
2190-4 AutoDrill |
| |
2190-5 AutoDrill |
|
2190-5 AutoDrill |
| |
| |
Chucks |
|
Chucks |
| |
Tapping Heads |
|
Tapping Heads |
|
| |
AutoDrill Series 1000-1100 with Air Motor Drive |
| |
DWG R14 |
|
DXF R12/R14 |
| |
AutoDrill 1015 10,000 RPM Air Drive |
|
AutoDrill 1015 10,000 RPM Air Drive |
| |
AutoDrill 1015 5000 RPM Hi-Torque Air Drive |
|
AutoDrill 1015 5000 RPM Hi-Torque Air Drive |
| |
AutoDrill 1115 10,000 RPM Air Drive |
|
AutoDrill 1115 10,000 RPM Air Drive |
| |
AutoDrill 1115 5000 RPM Hi-Torque Air Drive |
|
AutoDrill 1115 5000 RPM Hi-Torque Air Drive |
|